# M5Stack Tab5 Touch Dashboard

PlatformIO starter for the M5Stack Tab5. It demonstrates the 1280x720 display,
touch buttons, a brightness slider, touch coordinates, memory, battery, Wi-Fi,
and accelerometer status.

## Build and upload

```powershell
pio run
pio run --target upload
pio device monitor --baud 115200
```

If needed, append the port: `--upload-port COM29`.

## Controls

- **RED**, **GREEN**, and **BLUE** change the central panel.
- **RESET** restores the default and clears the counter.
- Drag the bottom slider to change brightness.
- Touching the colour panel draws a white marker.

Current M5Unified and M5GFX versions support the different display/touch
controller variants shipped in Tab5 units.

## Next steps

1. Connect Wi-Fi and show the IP address.
2. Add an SD-card browser.
3. Add camera and audio tests.
4. Recreate the dashboard with LVGL widgets.

## References

- [Tab5 documentation](https://docs.m5stack.com/en/core/Tab5)
- [M5Unified](https://github.com/M5Stack/M5Unified)
- [M5GFX](https://github.com/M5Stack/M5GFX)